Salta al contenuto principale

Cosa ti serve

Questo smontaggio non è una guida di riparazione. Per riparare il tuo DrayTek Vigor 2820, usa il nostro manuale di assistenza.

  1. DrayTek Vigor 2820 Teardown, remove the front plate: passo 1, immagine 1 di 2 DrayTek Vigor 2820 Teardown, remove the front plate: passo 1, immagine 2 di 2
    • The front plate is attached to the bottom with 3 clips.

    • Using a flathead screwdriver, pry open the first clip.

    • Use a flat object to hold the first clip open.

    • Use the flathead to open the remaining clips.

  2. DrayTek Vigor 2820 Teardown, disassemble case: passo 2, immagine 1 di 2 DrayTek Vigor 2820 Teardown, disassemble case: passo 2, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Flathead 3/32" or 2.5 mm Screwdriver
    $5.49
    Compra
    • With the 2.5mm flathead, remove the rubber feet.

    • Unscrew the 4 screws holding the top and bottom parts of the case together.

  3. DrayTek Vigor 2820 Teardown, remove the ADSL module: passo 3, immagine 1 di 3 DrayTek Vigor 2820 Teardown, remove the ADSL module: passo 3, immagine 2 di 3 DrayTek Vigor 2820 Teardown, remove the ADSL module: passo 3, immagine 3 di 3
    • Unscrew the screws attaching the ADSL module to the mainboard.

    • The mainboard:

    • Nanya Technology NT5DS16M16CS-5T 256Mb DDR SDRAM

    • Infineon Technologies PSB 6972 HL V1.2 Ethernet Switch Controller

    • Delta Electronics LFE8731

    • Delta Electronics LFE9208A

knipwim

Membro da: 09/01/18

8.527 Reputazione

30 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 28

Tutti i Tempi: 1,294