Salta al contenuto principale

Questo smontaggio è in corso – Ricarica periodicamente per vedere gli ultimi cambiamenti!

Cosa ti serve

  1. Dell Quietkey SK-8000 Keyboard Teardown, Remove Back Plastic Body: passo 1, immagine 1 di 2 Dell Quietkey SK-8000 Keyboard Teardown, Remove Back Plastic Body: passo 1, immagine 2 di 2
    • Flip the keyboard over to expose 8 screws.

    • Use a Phillips screwdriver to unscrew and remove each screw.

  2. Dell Quietkey SK-8000 Keyboard Teardown: passo 2, immagine 1 di 2 Dell Quietkey SK-8000 Keyboard Teardown: passo 2, immagine 2 di 2
    • Lift the keyboard upward from the bottom.

    • Do not pull too hard when lifting the base. Be careful not to destroy the wires connecting to the base of the keyboard.

    • Use a Phillips screwdriver to remove the remaining ten screws on the aluminum plate.

  3. Dell Quietkey SK-8000 Keyboard Teardown, Completion: passo 3, immagine 1 di 3 Dell Quietkey SK-8000 Keyboard Teardown, Completion: passo 3, immagine 2 di 3 Dell Quietkey SK-8000 Keyboard Teardown, Completion: passo 3, immagine 3 di 3
    • Carefully lift each part out. Each part should lift out very easily after the screws are removed.

  4. Dell Quietkey SK-8000 Keyboard Teardown, Siltek Chip Reveal: passo 4, immagine 1 di 1
    • The keyboard controller is seen to be a Siltek R4462.

Ion

Membro da: 09/29/15

479 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 10-5, Green Fall 2015 Membro di Cal Poly, Team 10-5, Green Fall 2015

CPSU-GREEN-F15S10G5

3 Membri

4 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 19

Tutti i Tempi: 999