This is a teardown of a Casio Digital Watch down to the internal circuitry.

You will need a small Phillips screwdriver for this teardown.

Carefully remove the four screws on the backside of the watch.

You will need an extremely small screwdriver. A screwdriver to repair glasses would work.

Press your fingers on the screen and remove the watch from its case.

Be sure to save the three buttons that control the watch

Remove the Battery Holder surrounding the circuitry of the watch by carefully pulling off each of the four clips.

Remove the battery by pulling from the sides to unstick the adhesive.

Remove the four plastic pins connecting the LCD and remove the LCD holder

This reveals the internal circuitry of the watch, and the teardown is complete.