Salta al contenuto principale

Strumenti necessari in questo Smontaggio

Introduzione

We are going to teach you how to take apart and put back together a Cannon Powershot N.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Canon PowerShot N, usa il nostro manuale di assistenza.

  1. Locate battery housing cover.
    • Locate battery housing cover.

  2. Place finger on the textured portion of battery housing cover and slide cover in the direction indicated.
    • Place finger on the textured portion of battery housing cover and slide cover in the direction indicated.

  3. Find beige tab and push it away from the battery.
    • Find beige tab and push it away from the battery.

  4. Remove battery from battery slot with fingers. Remove battery from battery slot with fingers.
    • Remove battery from battery slot with fingers.

  5. Using a PH000 size screwdriver, unscrew four screws beneath screen.
    • Using a PH000 size screwdriver, unscrew four screws beneath screen.

  6. Remove 2 screws on the bottom of the camera.
    • Remove 2 screws on the bottom of the camera.

  7. Remove 2 screws from the side of the camera with the on and off buttons.
    • Remove 2 screws from the side of the camera with the on and off buttons.

  8. Remove the back plate.
    • Remove the back plate.

  9. Locate 2 screws on “on/off” side of the camera and unscrew them.
    • Locate 2 screws on “on/off” side of the camera and unscrew them.

  10. Locate 2 screws on the other side of the camera and remove them.
    • Locate 2 screws on the other side of the camera and remove them.

  11. Remove one screw from the bottom of the camera.
    • Remove one screw from the bottom of the camera.

  12. Remove front plate from motherboard so that one ribbon cable is exposed.
    • Remove front plate from motherboard so that one ribbon cable is exposed.

  13. Locate the second ribbon cable.
    • Locate the second ribbon cable.

  14. Using plastic spudger, push tab to release the ribbon cable. Using plastic spudger, push tab to release the ribbon cable.
    • Using plastic spudger, push tab to release the ribbon cable.

  15. Locate screw under released ribbon cable and remove it.
    • Locate screw under released ribbon cable and remove it.

  16. With the camera lens facing you, remove 4 screws around the lens. With the camera lens facing you, remove 4 screws around the lens. With the camera lens facing you, remove 4 screws around the lens.
    • With the camera lens facing you, remove 4 screws around the lens.

  17. Flip over and remove 1 screw from side with playback/phone options .
    • Flip over and remove 1 screw from side with playback/phone options .

  18. Unscrew 2 screws from top, bottom, and both sides of screen. Unscrew 2 screws from top, bottom, and both sides of screen. Unscrew 2 screws from top, bottom, and both sides of screen.
    • Unscrew 2 screws from top, bottom, and both sides of screen.

    • Pull off white cap which edges the screen.

  19. Remove white metal plate behind screen (tip: try not to bend). Remove white metal plate behind screen (tip: try not to bend).
    • Remove white metal plate behind screen (tip: try not to bend).

  20. Push out LCD screen. Push out LCD screen.
    • Push out LCD screen.

Jack Graver

Membro da: 04/03/2016

313 Reputazione

1 Guida realizzata

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 13

Tutti i Tempi: 684