Salta al contenuto principale

Strumenti necessari in questo Smontaggio

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Cabstone Wired Optical Mouse, usa il nostro manuale di assistenza.

  1. Unplug the USB cord of the mouse from your PC first! Remove the lower glide pads at the bottom of the mouse.
    • Unplug the USB cord of the mouse from your PC first!

    • Remove the lower glide pads at the bottom of the mouse.

    • Use a screw driver to remove the screws highlighted here.

  2. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  3. Lift the cover where the screws sat and shift it backwards slightly (away from the cable). Everything else inside the mouse comes loose with this step. Lift the cover where the screws sat and shift it backwards slightly (away from the cable). Everything else inside the mouse comes loose with this step.
    • Lift the cover where the screws sat and shift it backwards slightly (away from the cable). Everything else inside the mouse comes loose with this step.

  4. The electronics board contains: 5 small buttons one mechanical rotary encoder (of the mouse wheel)
    • The electronics board contains:

    • 5 small buttons

    • one mechanical rotary encoder (of the mouse wheel)

    • one LED

    • the sensor IC Pixart PAN3101DB

raumschaum

Membro da: 27/02/2013

371 Reputazione

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 24

Tutti i Tempi: 2,191