Salta al contenuto principale

Questo smontaggio è in corso – Ricarica periodicamente per vedere gli ultimi cambiamenti!

Pericolo
Potenzialmente Pericoloso
Possibilità di infortunio se questa procedura non viene seguita correttamente. Prestare attenzione e seguire tutte le avvertenze.
Pericolo

Strumenti necessari in questo Smontaggio

  1. The Assembled Product, unplugged from wall
    • The Assembled Product, unplugged from wall

  2. Turn Smart Strip upside down and locate  four screw holes in corners Unscrew four corner screws with #0 Phillips Screwdriver
    • Turn Smart Strip upside down and locate four screw holes in corners

    • Unscrew four corner screws with #0 Phillips Screwdriver

  3. Locate four latch slots in case Use 2.4mm Slotted Screwdriver, put tip into center of slot, with tip on outer edge of slot, and press inward
    • Locate four latch slots in case

    • Use 2.4mm Slotted Screwdriver, put tip into center of slot, with tip on outer edge of slot, and press inward

  4. Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now

    Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now
  5. Take two halves of case apart with your hands Take two halves of case apart with your hands
    • Take two halves of case apart with your hands

    Really cool teardown...

    Is there a reason why you decided to do one on a power strip?

    FYI: there's absolutely NO sarcasm here. I'm always looking to add to my little of projects and this may have triggered and Idea

    If you don't mind sharing, why did this come to mind. Plesse, I don't need specifics. It just got me thinking of using this method to make a pretty nice expanded powerstrip that I desperately need, but don't want to pay over $120+ for 2 or more of the pricey ones, even though a surge protector would be nice (sorry I don't know if yours does, I skim thru fast when I read).

    Thank you!

    E

    es1101 - Replica

  6. Lift Ground Copper Strip upward off of power plugs by hand
    • Lift Ground Copper Strip upward off of power plugs by hand

  7. Locate latch securing power plugs to bottom of case Using slotted 2.4mm screwdriver, pry latch away from power plugs to loosen power plugs
    • Locate latch securing power plugs to bottom of case

    • Using slotted 2.4mm screwdriver, pry latch away from power plugs to loosen power plugs

  8. Lift power plugs out of bottom of case along with circuit assembly Lift power plugs out of bottom of case along with circuit assembly
    • Lift power plugs out of bottom of case along with circuit assembly

nils smith

Membro da: 14/11/2013

194 Reputazione

1 Guida realizzata

This is great! Thanks so much!

nils smith - Replica

that awesome and i like how it fix

Joseph donkor - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 6

Tutti i Tempi: 1,118