Salta al contenuto principale

Cosa ti serve

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Brother MFC-240C, usa il nostro manuale di assistenza.

  1. Brother MFC-240C Teardown, Brother MFC-240C Teardown: passo 1, immagine 1 di 3 Brother MFC-240C Teardown, Brother MFC-240C Teardown: passo 1, immagine 2 di 3 Brother MFC-240C Teardown, Brother MFC-240C Teardown: passo 1, immagine 3 di 3
    • Completely lift up scanner portion of printer and detach visible USB chord.

  2. Brother MFC-240C Teardown: passo 2, immagine 1 di 3 Brother MFC-240C Teardown: passo 2, immagine 2 di 3 Brother MFC-240C Teardown: passo 2, immagine 3 di 3
    • Use flat head screwdriver to pry tabbed panel off.

  3. Brother MFC-240C Teardown: passo 3, immagine 1 di 3 Brother MFC-240C Teardown: passo 3, immagine 2 di 3 Brother MFC-240C Teardown: passo 3, immagine 3 di 3
    • Gently lift up ribbon cable and pull it through holder then remove ribbon cable from its track.

  4. Brother MFC-240C Teardown: passo 4, immagine 1 di 3 Brother MFC-240C Teardown: passo 4, immagine 2 di 3 Brother MFC-240C Teardown: passo 4, immagine 3 di 3
    • Using a flat head screwdriver, remove the 2nd tabbed panel.

  5. Brother MFC-240C Teardown: passo 5, immagine 1 di 3 Brother MFC-240C Teardown: passo 5, immagine 2 di 3 Brother MFC-240C Teardown: passo 5, immagine 3 di 3
    • Remove the 4 plugs and unscrew ground-wire then place the plugs to the side.

  6. Brother MFC-240C Teardown: passo 6, immagine 1 di 2 Brother MFC-240C Teardown: passo 6, immagine 2 di 2
    • Using your screwdriver press down on the tab as shown. This allows the hinge to be removed from the printing body as seen in photo.

  7. Brother MFC-240C Teardown: passo 7, immagine 1 di 3 Brother MFC-240C Teardown: passo 7, immagine 2 di 3 Brother MFC-240C Teardown: passo 7, immagine 3 di 3
    • Extend scanner assembly completely to remove scanner portion.

  8. Brother MFC-240C Teardown: passo 8, immagine 1 di 2 Brother MFC-240C Teardown: passo 8, immagine 2 di 2
    • After removing the scanner assembly, place it on its head. Remove the hinge and 4 screws from the lower scanner portion using Philips-head screwdriver.

  9. Brother MFC-240C Teardown: passo 9, immagine 1 di 3 Brother MFC-240C Teardown: passo 9, immagine 2 di 3 Brother MFC-240C Teardown: passo 9, immagine 3 di 3
    • Place on opposite face, and gently pry upper and lower scanner portions apart. Remove the 4 plugs from the lower scanner portion.

  10. Brother MFC-240C Teardown: passo 10, immagine 1 di 3 Brother MFC-240C Teardown: passo 10, immagine 2 di 3 Brother MFC-240C Teardown: passo 10, immagine 3 di 3
    • To remove image sensor, detach the wire strip and pull it out. Remove the two springs that are under the image sensor after its removal.

  11. Brother MFC-240C Teardown: passo 11, immagine 1 di 3 Brother MFC-240C Teardown: passo 11, immagine 2 di 3 Brother MFC-240C Teardown: passo 11, immagine 3 di 3
    • To remove the belt, first place the image sensor to the side then press down on the gear base to loosen belt and remove from the gear.

  12. Brother MFC-240C Teardown: passo 12, immagine 1 di 3 Brother MFC-240C Teardown: passo 12, immagine 2 di 3 Brother MFC-240C Teardown: passo 12, immagine 3 di 3
    • Remove the 3 highlighted screws. For the gear driven by the motor, press the tab in highlighted gear to remove set gear. For the gear that was attached to belt, remove C-clip to remove gear then pull the last gear off.

  13. Brother MFC-240C Teardown: passo 13, immagine 1 di 2 Brother MFC-240C Teardown: passo 13, immagine 2 di 2
    • After the removing gears, lift up on the retained end of metal rod and pull out the other side.

  14. Brother MFC-240C Teardown: passo 14, immagine 1 di 2 Brother MFC-240C Teardown: passo 14, immagine 2 di 2
    • Once the rod has been removed, remove the metal plate in which the gears were sitting then take out the motor.

Andrew Adcock

Membro da: 11/10/16

131 Reputazione

1 Guida realizzata

2 Commenti

This is only the scanner part? where is the printer part for teardown?

rene moret - Replica

excellent guide, i like to know how to clean the head assembly and the the little hose that guides the ink to the head

alex jaimes - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 17

Ultimi 30 Giorni: 47

Tutti i Tempi: 4,800