Aggiusta la tua roba Comunità Store

Belkin Express Dock Teardown

Scritto Da: thompsonfamily (e 2 altri collaboratori)
Pubblicato: June 13, 2013
  • Commenti: 2
  • Preferiti: 14
  • Visualizzazioni: 5k

Belkin Express Dock Teardown

Scritto Da: thompsonfamily (e 2 altri collaboratori)
Pubblicato: June 13, 2013
  • Commenti: 2
  • Preferiti: 14
  • Visualizzazioni: 5k

Smontaggio

Strumenti necessari in questo Smontaggio

Acquista questi strumenti

Introduzione

The only tools needed are a philips screwdriver and a narrow putty knife.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Belkin Express Dock, usa il nostro manuale di assistenza.

  1. View of the connectors

    • View of the connectors

    Modifica

  2. Use a putty knife to remove the four rubber feet. Once removed, there are 4 phillips screws to be removed. Use a putty knife to remove the four rubber feet. Once removed, there are 4 phillips screws to be removed.

    • Use a putty knife to remove the four rubber feet. Once removed, there are 4 phillips screws to be removed.

    Modifica

  4. The next step is to use the putty knife to pry off one of the two plastic endcaps, they snap out and the circuit board slides out.

    • The next step is to use the putty knife to pry off one of the two plastic endcaps, they snap out and the circuit board slides out.

    Modifica

  5. Use the phillips screwdriver to remove 5 more screws to remove the plastic mounting frame.

    • Use the phillips screwdriver to remove 5 more screws to remove the plastic mounting frame.

    Modifica

  6. Front and back of the board. From left to right on the front of the board the major chips are: LSI FW643E-02 (FIreWire800); Broadcom BCM57762 (gige); Intel L150I56 (Thunderbolt controller), NXP LPC1114F (two), Fresco FL1100 (USB3); C-Media CM119A (Audio)

    • Front and back of the board.

    • From left to right on the front of the board the major chips are: LSI FW643E-02 (FIreWire800); Broadcom BCM57762 (gige); Intel L150I56 (Thunderbolt controller), NXP LPC1114F (two), Fresco FL1100 (USB3); C-Media CM119A (Audio)

    • From left to right on the back of the board the major chips are: Parade PS161HDM; Parade PS8301 (two); NXP ZSD310 (two); Parade PS8321. The chips seem to support HDMI/DVI conversion and Display Port!

    Modifica

  7. close-ups of the major chips close-ups of the major chips close-ups of the major chips

    • close-ups of the major chips

    Modifica

Autore

con 2 altri collaboratori

thompsonfamily

Membro da: 21/01/2011

217 Reputazione

1 Guida realizzata

Distintivi: 0

2 Commenti

Aggiungi un commento

Hi… someone have the board scheme, please?

My express dock only flashing the Led when I plugged the power cord and turn off

Anderson Galdino - Replica

I cannot get any power going into the dock. I was wondering if anyone has had any experience with the analog board and dead power. The cables are hot so I know it must be the dock itself. Just nothing. Its internal leds do not light up and the Ethernet port has no activity lights either.

Any advice would be welcome.

airira - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 25

Tutti i Tempi: 5,077