Questo smontaggio è in corso – Ricarica periodicamente per vedere gli ultimi cambiamenti!

Strumenti necessari in questo Smontaggio

  1. There are three blue LEDs to show you the power in the battery.
    • There are three blue LEDs to show you the power in the battery.

    • There is also a handy LED to see what you are doing in the dark.

    Aggiungi Commento

  2. The bottom of the device.
    • The bottom of the device.

    • It's time for some prying. Take out the rubber plugs at the bottom of the device.

    • Remove the screws which are underneath the plugs.

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • use a flathead screwdriver or a spudger to pry open the device.

    • Don't pry at the front of the device - there are a few hooks and you do not want to break them.

    Aggiungi Commento

    • A first glance at the inside: a big battery and the logic board.

    • There is a 1800 mAh battery in it.

    • There are two screws in the logic board, the battery is glued to the casing.

    Aggiungi Commento

    • The other side of the electronics.

    • And the logic board.

    Aggiungi Commento

    • And there it is: the A-Solar PowerBank AL-200 torn down.

    • It was easy to do.

    Aggiungi Commento

storm

Membro da: 07/07/2012

497 Reputazione

2 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 28

Tutti i Tempi: 3,309