Salta al contenuto principale

Cosa ti serve

Questo smontaggio non è una guida di riparazione. Per riparare il tuo 5 LED 6 Mode Rear Bike Light, usa il nostro manuale di assistenza.

  1. 5 LED 6 Mode Rear Bike Light Teardown, 5 LED 6 Mode Rear Bike Light Teardown: passo 1, immagine 1 di 1
    • Obtain the necessary tools

  2. 5 LED 6 Mode Rear Bike Light Teardown: passo 2, immagine 1 di 2 5 LED 6 Mode Rear Bike Light Teardown: passo 2, immagine 2 di 2
    • Insert coin or any flat object into edge of light cover

    • Pry open until cover loosens

  3. 5 LED 6 Mode Rear Bike Light Teardown: passo 3, immagine 1 di 2 5 LED 6 Mode Rear Bike Light Teardown: passo 3, immagine 2 di 2
    • Remove the single Phillips #00 screw holding the circuit board in place

    • Remove both AAA batteries

  4. 5 LED 6 Mode Rear Bike Light Teardown: passo 4, immagine 1 di 2 5 LED 6 Mode Rear Bike Light Teardown: passo 4, immagine 2 di 2
    • Remove both Phillips #00 screws holding the clip in place

    • Remove the clip with a flat object

    • The button will fall out when removing the clip. Do not lose it!

  5. 5 LED 6 Mode Rear Bike Light Teardown: passo 5, immagine 1 di 1
    • Congratulations! You completed your device teardown!

Alex Sireci

Membro da: 09/30/13

100 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 14-8, Forte Fall 2013 Membro di Cal Poly, Team 14-8, Forte Fall 2013

CPSU-FORTE-F13S14G8

4 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 11

Tutti i Tempi: 1,786