Salta al contenuto principale

Guide di riparazione, supporto e informazioni sulla risoluzione dei problemi per i modelli MacBook Air con schermo da 13"

3640 Domande Visualizza tutte

missing screw post on Logic Board

Hello .

I just purchased macbook air a1237 model.

Looks like it is missing screw post and screw located between cpu's .This screw is holding heat sink as well cpu bracket (v shape ) .

Is there way to buy missing post for the screw or fix that some how ? Looks like this mac is overheating now and turns off after few min .

See pic below on link

http://forums.appleinsider.com/t/151696/...

Block Image

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

2 Risposte

Risposta Più Utile

Try contacting iFixt directly if no one else pops up with the part.

''If this answer was helpful please remember to return an mark it Accepted..

Questa risposta è stata utile?

Punteggio 1

2 Commenti:

i did try this road already

da

Then purchasing a dead (for parts only) machine from e-bay is your only hope. You might be able to negotiate with a seller for only that part-if not get the offered machine and part out the remaining good parts.

da

Aggiungi un commento

If the heat sink is loose, and if a thin coat of thermal paste is missing those could be the causes of your overheating.

You could try contacting iFixit directly to see if they have the part.

If this answer was helpful please remember to return an mark it Accepted.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Gregory Chojnacki sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 293