Aggiusta la tua roba Comunità Store

Modello versione metà 2009 A1278 - EMC2326 / processore Core 2 Duo 2,26 o 2,53 GHz

745 Domande Visualizza tutte

Opzioni

MacBook won't turn on with isight / airport connected to logic board

Hello. I've been given a Macbook Pro where, it seems, the Airport cable was connected backwards. It was turned on, smelled funny, and was turned off. Now, when the cable for the isight / airport is attached to the logic board the system won't start at all. Remove the cable, it runs fine, but without isight or airport.

Any ideas? Is it the logic board, isight, airport, the cable? Thanks!

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 1
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Soluzione Prescelta

Opzioni

Since it starts without the iSight, Airport cables you can rule out the logic board. The camera cable AFAIK is not near the bluetooth/airport connector. Try one connector - to the correct spot - insulate the other connector. I think you may have blown the bluetooth/airport card. When booted what does System Profiler:Bluetooth, then Network lastly Wi-Fi reveal about the state of your cards.

If this answer was helpful please remember to return an mark it Accepted.

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

RN74 sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 625