Salta al contenuto principale

Model No. A1367 / 8, 16, 32, or 64 GB capacity

913 Domande Visualizza tutte
Domanda Chiusa

The display isn't turning on despite being powered?

Question above. The digitizer (that's the black ribbon cable, right?) is intact, but the little chip on a short ribbon appears to be disconnected (I think that's the display cable). If this is the problem, how do I resolve it? If not, what information can I give? Thanks in advance!

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Soluzione Prescelta

Yes, that is your display cable. If it is severed, the entire screen assembly will need to be replaced.

Best of Luck,

Tough Gaming Technical Support

Agent Elisha

Questa risposta è stata utile?

Punteggio 0

4 Commenti:

It's not severed. It's just the chip at the end of the cable is not connected to the little piece where it's supposed to be connected. In that case, how do I get it back in there?

da

Can you post a image? That will help greatly.

da

Sorry I'm a bit late: images here. http://imgur.com/FpW7O,lOiNA

da

I see what your problem is. Just align it up and press down. Make sure that is aligned with the chip on the mainboard before pressing down, ad you may break the connector on the mainboard. This connection is required to get the LCD Display Screen to work, it the same as the one undernieth. Best of luck,

da

Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 236