RISOLTO: Screen Cover ( i.e bit with Apple Logo ) Seperating from LCD - MacBook Pro 15" Unibody Late 2008 and Early 2009

Screen Cover ( i.e bit with Apple Logo ) Seperating from LCD

Hello,

I cant find any guide to assembly of the LCD part of the MacBook Pro. The 'top cover' of the LCD on mine was never perfectly straight and recently its popped off on one side. It looks like its just glued on when i push it down it looks pretty much normal.

Any ideas ?

Cheers Alex

Picture : http://img6.imageshack.us/img6/2408/img0...

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

Postato: 22 feb 2010

Opzioni

If still under warranty I would take it in, else wise:

The glue used is heat activated. If it will go back together I would use some "C" clamps (Home Depot has some with rubber feet) and some adhesive: Fix-All Adhesive is a great all-purpose solvent glue and sealer. It seals and repairs almost any surface easily and quickly. http://www.supergluecorp.com/super-glue/... FixAll

Questa risposta è stata utile?

Sì No

Punteggio 3

2 Commenti:

Good answer. +1 Ralph

22 feb 2010 da rj713

Hi, No warranty i am afraid as i bought it just after it came out. I will give your idea a shot. I just wanted to see if this was the way it was orginally held together before ploughin ahead

23 feb 2010 da Alex

Aggiungi un commento

MacBook Pro 15" Unibody Late 2008 & Early 2009

Screen Cover ( i.e bit with Apple Logo ) Seperating from LCD

1 Risposta

Aggiungi la tua risposta