Salta al contenuto principale

Il G4 Quicksilver può avere le seguenti configurazioni: - Single 733 MHz (Quicksilver) - Single 867 MHz (Quicksilver) - Dual 800 MHz (Quicksilver) - Single 800 MHz (Quicksilver 2002) - Single 933 MHz (Quicksilver 2002) - Dual 1 GHz (solo per Quicksilver 2002)

49 Domande Visualizza tutte
Domanda Chiusa

How do I replace the display card in my Power Mac G4?

The monitor quit showing my 2000 Power Mac G4. I tested it with other working monitors & none of them worked with my G4, but did work on other computers.The G4 does power up. I was told it was more than likely the display card in the computer.

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

4 Risposte

Soluzione Prescelta

You can open it, and remove it using this guide (It's For a newer powermac G4, but the procedure is the same) Power Mac G4 MDD Graphics Card Replacement

You can replace it with a Mac compatible AGP graphics card, or flash certain PC cards, though it deppends on what you do with the machine. If you use an apple ADC display, you cannot use a flashed card. Here are some links to compatible replacement cards(in order from least to most powerful):

ATI Rage 128 (16MB):

http://cgi.ebay.com/Mac-ATI-Rage-128-Pro...

NVIDIA GeForce 2MX (32MB):

http://cgi.ebay.com/Apple-Mac-630-3703-n...

ATI Radeon 9000 (64MB):

http://cgi.ebay.com/ATI-Radeon-9000-Pro-...

ATI Radeon 9600XT (128MB):

http://cgi.ebay.com/ATI-RADEON-9600-XT-1...

NVIDIA GeForce 4 Titanium (128MB, In my one G4):

http://cgi.ebay.com/nVidia-GeForce-4-Ti4...

Flashed Cards:

ATI Radeon 9700 Mac (Flashed, 128MB):

http://cgi.ebay.com/ATI-Radeon-9700-Pro-...

ATI Radeon 9800 Pro (Flashed, 128MB):

http://cgi.ebay.com/Mac-ATI-Radeon-9800-...

Questa risposta è stata utile?

Punteggio 3
Aggiungi un commento

If you want to go back with original equipment just do a search on eBay apple & component then video & AGP. Here's one for $10.80 with free shipping, Apple Mac G4 ATI Rage 128 Pro VGA DVI AGP Video Card HS. To put it in just remove the one screw holding it in, pull the card and replace. The AGP cards have a small tab on the bottom back end of the card next to th motherboard that you have to push about 1/2 inch to side side to disengage it.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Chris,

This is exactly what I needed. This is my first time using iFixit, & I can't believe how fast you responsed!

What a great site! I will certainly tell people about this website.

Thanks Chris, & thank you so much for your time.

Kim Walker

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

A warning on the APPLE ATI Radeon 9000 Pro.

FYI - I have a factory installed APPLE ATI Radeon 9000 Pro in my MDD Mac, and when running OSX 10.4.11, my machine crashes when waking from sleep. It may be Video sleep, or machine sleep, or both. So I turn off hardware sleep, and all is well.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 4,917