Salta al contenuto principale

Remove Display Cable from the Logic Board

Dear All.

I do not figure out how I can remove the Display Cable from the Logic Board without distroying it.

Could someone describe exactly how to do it, it would be perfect if there would be some additional pictures to show how.

Best regards

MacWiniac

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio -1
Aggiungi un commento

1 Risposta

Soluzione Prescelta

Carefully read the guide all the way through before doing this: PowerBook G4 Aluminum 15" 1.5-1.67 GHz Display Data Cable Replacement

Questa risposta è stata utile?

Punteggio 3

1 Commento:

Dear Mayer.

I have read all the guides carefully, but in step 15 it is only stated to disconnect the 13 cables, but not how specifically to disconnect the display cable from the Logic Board. However in step 14 there is specifically described how to disconnect this special connector. That is what I like to have for the display cable.

Best regards,

MacWiniac

da

Aggiungi un commento

Aggiungi la tua risposta

MacWiniac sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 464