Salta al contenuto principale
Unisciti alla Community delle riparazioni - Crea un account

The XMAX V3 Pro is a pen vaporizer for dry herbs from the TopGreen brand.

randomally my v3 stopped reading battery and won't turn on

V3 been used daily for 4 months or so and then mid road trip it failed. Won't turn on and when I plug charger in it says charging mode like . If I press 3 times it says see you . But if I press 5 times it says xmax and does load up but then says battery flay warning .

I left it with no battery installed for 24 hrs and it worked fine for one batterys worth . When I replaced it with full battery it went back to broken mode. Seems like firmware . Iv trydd cleaning contacts multiple batterys etc. No luck. Pulled it apart no visible issue reassembled n still same.

Any idea anyone smarter than me?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Risposta più utile

I just fixed mine with similiar symptoms.

In my case, the wire ripped off the negative pin.

I love how easy this thing is to take apart!

But still, there is the guide to do it.

https://de.ifixit.com/Anleitung/Auseinan...

In this image is the pin. The solder was fine, it ripped just after the the latch.

https://guide-images.cdn.ifixit.com/igi/...

To check if its the case with your device, you can use a DMM in continuity mode and check from the pin to negative wire, on both ends.

Questa risposta è stata utile?

Punteggio 1

1 Commento:

Thank you for the update. I'll open mine up and take a look and report back.

Thank you from NZ.

da

Aggiungi un commento

Aggiungi la tua risposta

joel atkinson sarà eternamente grato.
Visualizza statistiche:

Ultime 24 ore: 2

Ultimi 7 giorni: 16

Ultimi 30 giorni: 84

Tutti i Tempi: 952