Aggiusta le tue cose Community Store

La versione rilasciata nel maggio 2020 del MacBook Pro da 13" si caratterizza per i processori quad-core Intel i5 e i7 di 10ª generazione e per la grafica integrata Intel Iris Plus (modello a2251/EMC3348 con quattro porte Thunderbolt 3).

20 Domande Visualizza tutte | 31 Parti Negozio

Opzioni

Trackpad not working after battery replacement

I replaced my Macbook Pro 13 2020 battery with a new one. After replacing it, the trackpad wont work anymore. It wont click or anything. I was careful to not break any SMD components while working on the battery. I possibly could used a little too much alcohol when trying to break down the middle cells adhesive, but idk if that do anything. Did I break the trackpad cable? Should I order a new one?

EDIT HERE ARE PICTURES this is a picture of my trackpad circuit

Block Image
Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

1st would be to review the guide for Sostituzione trackpad MacBook Pro 13" 2020 con quattro porte Thunderbolt to make sure everything is connected properly, then unless you have much better eyes than me you'll likely need a magnifying glass to see if the track pads cable pins have been damaged, if so then you'll need to buy a new cable for that. If they appear to be straight, intact and not damaged, then it could be the cable or track pad has been damaged by the Alcohol as you need to use 90% Alcohol and not that 70% stuff that they say is good to put on your hands.... If there is still no luck then @danj will come to the rescue :)

Questa risposta è stata utile?

Sì No
Punteggio 2

7 Commenti:

Reagent grade IPA is best.


The issue is the other materials in solution that we don’t want as they can leave a film or cause damage to some plastics. Here the other solvents could wash the adhesive into the connector preventing them to work properly.

da

In that case do I need to replace the whole trackpad?

da

@junaaydshaikh Well new stuff usually always works but the idea here is to repair and rescue what we already have. Try what I suggested above 1st, if no luck then get a new track pad and cable just to be sure.

da

btw I used 91% isopropyl, I don't think it would cause any damage to anything other than the flex cable

da

@junaaydshaikh Try just the cable 1st then.....

da

Mostra altri 2 commenti

Aggiungi un commento

Aggiungi la tua risposta

Junaayd Shaikh sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 18

Tutti i Tempi: 173