RISOLTO: Copper clip fell off - Mac Mini Model A1176

Copper clip fell off

Mac Mini A1176

I have disambeled my Mini, and a small copper clip fell off, and don't see where it should go.

I was told..f you look at the front of the machine with the top off- right under the front lip of the optical drive you'll see a little area where it slides over.. the doubled-back part fits on that- there's a tab that fits the groove on the spring, and the spring part faces down.

But I still don't see where it connects.

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

Postato: 4 mag 2012

Opzioni

Maybe if you tell us what you were working on or trying to fix we can get you to the correct guide that will show your part. It would also help to know your exact model (the A1176 has several) it would help. We can determine that from the last three figures of your serial number.

Questa risposta è stata utile?

Sì No

Punteggio 3

4 Commenti:

With it apart, i'm unable to get the serial number, you know of no brass clips?

4 mag 2012 da pfhannan

It's probably the EMI optical drive clip, Apple part # 922-7336. Here's a picture: http://www.gainsaver.com/Catalog/Detail....

4 mag 2012 da mayer

yes, it is, now how to place it in the right place.....

4 mag 2012 da pfhannan

you can see it in place on step #9 of this guide: Installazione dell'unità ottica nel Mac mini modello A1176

4 mag 2012 da mayer