When I turn vacuum on it lights up but vacuum don't come on

Here are two possible solutions to the Shark Apex DuoClean Powered Lift-Away AZ1002 vacuum not turning on:

• Check the Power Cord and Outlet:

• Ensure the power cord is securely plugged into the vacuum and the wall outlet.

• Try plugging the vacuum into a different outlet to rule out a faulty outlet.

• Reset the Vacuum:

• Unplug the vacuum from the power outlet.

• Wait for a few minutes, then plug it back in.

• Try turning it on again.

If these solutions don't work, you can try the following additional steps:

• Check the Power Switch:

• Make sure the power switch is in the "On" position.

• If the switch feels loose or unresponsive, you may need to repair or replace it.

• Inspect the Fuse:

• If your vacuum has a fuse, check if it's blown.

• If the fuse is blown, replace it with a fuse of the same amperage.

• Check for Obstructions:

• Inspect the hose and attachments for any clogs or blockages that might be preventing the vacuum from working.

• Clear any obstructions you find.

• Contact Shark Customer Support:

• If none of the above solutions work, contact Shark customer support for further assistance. They can provide specific troubleshooting steps or arrange for repairs.

Here are some additional resources that may be helpful:

• Shark APEX DuoClean Troubleshooting Guide: https://support.sharkclean.com/hc/en-us/...

• Shark APEX DuoClean Powered Lift-Away AZ1002 Review: [invalid URL removed]

I hope this helps!