Aggiusta la tua roba Comunità Store

Model A1318 / 32 or 64 GB capacity

299 Domande Visualizza tutte
Domanda Chiusa

Opzioni

Why does the home button not work?

Every after market screen with digitizer and home button assembly I buy has a defective home button. What's the deal? Am I doing something wrong in the installation process? I did not purchase the front panel assembly from ifixit. I have purchase 5 of these for gen 3 and gen 2 ALL of them have defective home buttons.

I'm trying to avoid spending $69.95 on the one from ifixit. I am now regretting this decision. Any tips?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

2 Risposte

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

Check the "z"-spring on the board that the home button come in contact with, it may need to be stretched up a bit to make that contact.

It's the gold piece next to the LCD connector.

http://img684.imageshack.us/img684/2159/...

Questa risposta è stata utile?

Sì No
Punteggio 2
Aggiungi un commento

Opzioni

Be careful ... I had the same problem.

Tried two digitizer replacements. On both the home button 'collapsed' and would not spring back after about a week of use

Took the front plate off to try stretching that little "z" spring upwards. It broke off as soon as I touched it!

Still haven't figured out if I can repair without replacing the whole board... not pleased at all.

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,218