Opzioni

power port on chassis loose

Hi.

The port to plug my ac adapter into is loose. whenever I go to plug it in, the plug always falls out. I've checked why, and it appears that I've broken the foundation it was attached to.

I can still charge, so that's not the issue.

What can I do to reconnect it to the "base" it's attached to, so it won't constantly fall out?

I'm guessing this has to do with opening the case, and getting down to the motherboard. As well as either some soldering, etc....

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio -1

3 Commenti

Please give the last three figures of your serial number.

26 mar 2012 da mayer

the last 3 of the SN is

RJ7

26 mar 2012 da Steve

Apple PowerBook G4 1.5 12" (Al) Specs

Identifiers: 12-Inch - 1.5 GHz - M9690LL/A* - PowerBook6,8 - A1104 - 2030

27 mar 2012 da mayer

Aggiungi un commento

Postato: 27 mar 2012

Opzioni

The main problem is getting to the screw that holds the DC-IN board in place, here's the guide: PowerBook G4 Aluminum 12" 1-1.5 GHz DC-In Board Replacement

The screw is usually held in place with one screw and is covered by a piece of tape. It's about the last thing to be removed when tearing down this machine so you can actually superglue it into place along with using locktite to secure the screw.

Questa risposta è stata utile?

Sì No

Punteggio 2

Aggiungi un commento

PowerBook G4 Aluminum 12" 1-1.5 GHz

power port on chassis loose

1 Risposta

Aggiungi la tua risposta