Aggiusta la tua roba Comunità Store

Modello A1136 con 30, 60, o 80 GB di hard disk con plastica frontale bianca o nera

797 Domande Visualizza tutte

Opzioni

Can't see the device after replacing disk

My ipod video stopped working. It would either say the battery was low or it would just display the support web address. I decided to replace the disk and since I was replacing it I upgraded from 30gb to 60gb. I purchased a new battery, headphone/hold switch, front, back and disk. Now it just clicks. I can't see it in iTunes or windows "My Computer". Nothing shows up on the display. Any ideas?

Thanks.

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio -1
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Soluzione Prescelta

Opzioni

gocleveland, check your HDD cable. I have had plenty of 5th gen iPod that had a broken cable. Make sure that you check the way it is inserted. It is possible that it is broken as well. Anytime I now change a HDD I also replace the cable. Also make sure that you replace the HDD with the same brand. I do know that the Toshiba and Hitachi drive require a separate HDD cable. If you can, get a USB-to-ZIF adapter and check your HDD separate from your iPod. Hope this helps, good luck.

Questa risposta è stata utile?

Sì No
Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

gocleveland sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 514