Salta al contenuto principale

2.26 or 2.4 GHz / White plastic unibody enclosure

645 Domande Visualizza tutte

My speakers and headphone jack do not work/no output device?

I recently did a rebuild due to water damage on a 2009 macbook A1342. I replaced the uppercase, keyboard,and trackpad. All of the other parts are original. Since then, however, I have been without sound. The volume controls when pressed are dimmed and when I go into system preferences their are no output devices found. When I rebuilt the machine I saw no burns or anything that would indicate that any damage has happened to the MOBO, but I'm no expert. I was hoping someone knows the answer to this puzzle. Even if I can't fix it I would love to at least get a diagnosis.

Thanks

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

2 Risposte

Soluzione Prescelta

If SystemProfiler->Audio does not identify the ports then they are damaged. Get a magnifying glass and check (both sides) the logic board for corrosion and/or burn marks... cleaning may help corrosion - otherwise it's live without sound or replace the logic board. (IMnsHO Soldering Logic Board components is not the "average" DIY sort of repair it requires special solder, tools & experience it's easy to thrash a board).

A workaround is to get a USB audio dongle... USB sound often works when the analog ports do not.

If this Answer is helpful please remember to return and mark it Accepted.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

i tried everything to try fix my 'no output device found' problem.

reinstalled twice even

in the end his technique worked for me

i've edited it a bit to make it easier to do it correctly

Step One: Open Applications.

Step Two: Find Utilities folder and open.

Step Three: Find the Audio MIDI Setup icon and open.

Step Four: on the MIDI page there will be the IAC Drive. If it Greyed Out, Select and click on “Add Devices”.

Step Five: double click on the IAC Drive, If the word BUS is in this box select and remove.

Step Six: Make sure that the “Device is online” is checked. Your IAC Driver Icon should be all red.

FINALLY RESTART.

I really hope this fixes the problem for others as it's immensely frustrating!

Good luck

Questa risposta è stata utile?

Punteggio 0

1 Commento:

Hi I tried your method but I'm stuck on Step 5 the word IAC Drive doesn't seem to appear in my macbook. Any clarification would be much appreciated. Thank You

da

Aggiungi un commento

Aggiungi la tua risposta

sam lane sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 2,938