Opzioni

Battery problem in reassembly. Cable too short?

Hi guys, got a problem reassembling my iPod. I've changed my battery as wrote here:

Yesterday I've reopened my device (for the 4th time, now I'm a great disassembler) and I try to clean the logic board and the dock connector. So I try to connect that to the wall charger, with everything open. After a few hours my battery is magically charged and it works! But when i close my iPod it doesn't work.

So the problem is that when my device is closed, the orange battery cable won't stay in the correct position, even though it's locked. Maybe that cable is too short.

How to solve my problem? Thanks!

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio -1

Aggiungi un commento

Postato: 14 mar 2012

Opzioni

Check on your battery number and make sure that you have the right battery. I know that the battery for the 5th generation has a slightly shorter cable. Of course, also make sure that you have the cable going the right way above the hard drive. Hope this helps, good luck.

Questa risposta è stata utile?

Sì No

Punteggio 2

2 Commenti:

Thanks for your answer, I have the right battery and the cable is in the right position. Glue? I want to be sure that the next time I open my iPod is the last time.

19 mar 2012 da gianlucafatteri

Glue=bad idea ;) PITA to open it the next time....

19 mar 2012 da oldturkey03

Aggiungi un commento

iPod 6th Generation

Battery problem in reassembly. Cable too short?

1 Risposta

Aggiungi la tua risposta