So I'm trying to replace my battery on a samsung galaxy s7 and the back panel still won't come off even after blisteringly hot heat from a hairdryer. Is there any way I can use something other than heat to help get the adhesive off?
Questa è una buona domanda?
You will need a tool to remove the back working round the edges the glue that holds it is all round the edges and in the middle and if you have not done this before it will probably break it a repleacement in cheap
Questa risposta è stata utile?
Rep: 783,6k
1,1k
894
2,3k
@esaiboatrig2973 you need the back to be at about 140 deg F for the adhesive to soften. I would suggest either a heat gun and a good thermometer, or a hot plate to accomplish this. The heat has to be consistent and even. cover your camera while you heat it. use something like this tool iSesamo Opening Tool|Shopping|MiscTools}&pk_source=google&pk_medium=cpc&pk_kwd=&gclid=Cj0KCQjwiIOmBhDjARIsAP6YhSX_AFLzLeDUcSLLQHJm75sCh4BrDZLdEUAlUFBvy7XLJh-yBF9631UaApEwEALw_wcB and leep reapplying the heat. Yes, do wear some gloves since it will be unpleasant to hold your phone while doing this.
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 2
Ultimi 30 Giorni: 4
Tutti i Tempi: 44
@esaiboatrig2973 are you referring to the back glass? Has it ever been disassembled before? Any change in adhesive?
da oldturkey03
@oldturkey03 Yes I am reffering to that. It's never been dissassembled.
da Esai Boatright (topdogman)