When I push the start button, nothing happens (most of the time).

Question

iBook G3 14"

Model M8413 or A1007 / 600, 700, 800, or 900 MHz G3 processor

36 Domande Visualizza tutte

johnaron @johnaron

Rep: 1

Postato: 13 gen 2012

Opzioni

When I push the start button, nothing happens (most of the time).

The symptoms: Start-up fails. But a few times I'd get the start-up chime and then nothing. Once or twice I got to log in and then nothing. I noticed, before it died, that while typing and the screen wiggled, the screen contents also wiggled in sync. I took guidance from iFixit, using the "get the hard drive out" series. I needed to retrieve my photo library. Yah, Yah, I know, "why didn't you have it backed up?" I just didn't. I bought a DC-in assembly from you guys and in the meantime got a Universal Drive Adapter (Newertech) from OWC to get the stuff off my drive.

Yesterday I got everything back together, but got the same symptoms. 5 or 6 tries, maybe 1 or 2 chimes. This morning I tried again, got logged in, then nothing.

Does any of this ring any bells?

Thanks in advance.... J Aronson

I tried reseating my RAM to no avail, but thanks

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio -1

11 Commenti

have you tried reseating your ram?

13 gen 2012 da pollytintop

I don't know how to answer responders

14 gen 2012 da johnaron

OK, now I get it. pollyintop, tx. No luck with the reseat.

14 gen 2012 da johnaron

pollyintop. tx...where to find the forums you mentioned?

14 gen 2012 da johnaron

lemerise... tx....is it possible to fix w/o $280 logic board?

14 gen 2012 da johnaron

Mostra altri 6 commenti

Aggiungi un commento

2 Risposte

Soluzione Prescelta

lemerise @lemerise

Rep: 37,6k

315

66

72

Postato: 14 gen 2012

Opzioni

Looks like a failing graphic chip so the logic board would have to be replaced. No problem with your data, just remove the hard disk and put it in an IDE external enclosure or in another PPC machine.

Questa risposta è stata utile?

Sì No

Punteggio 5

2 Commenti:

there are a couple of forums with "fixes" for this issue including making a shim from foil to push the graphic's chip onto the board better. I also had this kind of issue with a bad start and it was the charger at fault (no screen wobbles though)

14 gen 2012 da pollytintop

@pollytintop : the problem is << I noticed, before it died, that while typing and the screen wiggled, the screen contents also wiggled in sync>> clearly a symptom of a desoldered graphic chip on theses G3s associated with the freezing and difficulty to boot the system.

14 gen 2012 da lemerise

Aggiungi un commento

lemerise... tx....is it possible to fix w/o $280 logic board? — johnaron
there are a couple of forums with "fixes" for this issue including making a shim from foil to push the graphic's chip onto the board better. I also had this kind of issue with a bad start and it was the charger at fault (no screen wobbles though) — pollytintop
@pollytintop : the problem is << I noticed, before it died, that while typing and the screen wiggled, the screen contents also wiggled in sync>> clearly a symptom of a desoldered graphic chip on theses G3s associated with the freezing and difficulty to boot the system. — lemerise