Salta al contenuto principale

Modello A1502 / processore dual core Intel i7 2,6 GHz (Turbo Boost fino a 3,1 GHz) o 2,8 GHz (Turbo Boost fino a 3,3 GHz) con 4 MB di cache L3 condivisa.

494 Domande Visualizza tutte

mac won't turn on or charge

hey,

I have change my battery six month ago with a iFixit kit. Everything was going well.

I am in holiday in the Caribbean, when I plugged the charger the first time (It was running out of battery), I had a very short (0,2s) green light on the Magsafe, then it stopped.

And since my mac won't charge at all (no light), I tried the different NVRAM and SMC, with an other Magsafe charger (a friend have exactly the same mac and doesn't have any problem...) - nothing.

I really don't know what to do now. Asking myself if it's a short-circuit that damaged the battery cause of the voltage difference ? Or just that my mac died on me randomly. Am pretty desperate right now because I have all my work on it.

Please, help me :)

Thanks in advance for your advise !

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
2 Commenti

So the MagSafe LED just goes out? Or did it go Amber.

da

It lit just once very shortly, then nothing since !

da

Aggiungi un commento

2 Risposte

Risposta Più Utile

@jeanlecerf Unfortunately, you most likely have a bad battery (even iFixit isn’t immune to manufacturing defects). There is a known issue with the chips on the batteries board, that either needs replacing (NOT a DIY job) or a replacement battery. I had the exact same issue with a battery for a 2013 MB Air (not purchased from iFixit).

Get in contact with iFixit support about the problem. They’ll take excellent care of you :)

Questa risposta è stata utile?

Punteggio 2

3 Commenti:

Thanks for your answer ! How did you do then with your MB ? Changed the battery?

da

@jeanlecerf I luckily hadn’t recycled the original battery, which was still OK-ish, so I put that back and everything was A-OK again. The supplier was out of stock on the battery, so I’m still waiting for the replacement.

da

Thanks you very much. I still also have my original one. I'll try when am back home. Fingers crossed !

da

Aggiungi un commento

Try disconnecting the battery from the logic board and MagSafe. Press and hold the Power Button for 15 seconds. Reconnect the battery, the the MagSafe, you should get a spontaneous restart.

Questa risposta è stata utile?

Punteggio 2

1 Commento:

Thanks. But just tried and nothing new...

da

Aggiungi un commento

Aggiungi la tua risposta

jeannotparis sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 7

Tutti i Tempi: 119