Salta al contenuto principale

Modelli A1419 / Fine 2012 / Processori 2.9 & 3.2 GHz Core i5 o 3.4 GHz Core i7, ID iMac13,2

328 Domande Visualizza tutte

Monitor has vertical lines at start-up.

At the startup chime the display comes on with these vertical lines. As the boot-up continues the screen color changes indicating the system is running. I accessed the the diagnostic LEDs, all 4 are lit.

Do I need a replacement display or logic board?

Block Image

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Soluzione Prescelta

Your display panel is damaged, you can prove that by hooking up an eternal display as the image on it will be clean. This is a common issue with the newer Thin series as the display is glued on so if you don't use the correct tools and techniques to remove it you can easily damage the display.

Here's the needed tools:

And Parts:

And here's the guide which you need to follow: Sostituzione schermo iMac Intel 27" EMC 2546

Immagine Plastic Cards

Prodotto

Plastic Cards

$2.99

Immagine iFixit Opening Picks (Set of 6)

Prodotto

iFixit Opening Picks (Set of 6)

$4.99

Immagine iMac Intel 27" (2012-2019) Adhesive Strips

Prodotto

iMac Intel 27" (2012-2019) Adhesive Strips

$19.99

Questa risposta è stata utile?

Punteggio 1

1 Commento:

Yes, I believe you are correct. The trick in my situation was the external monitor would not actually work unless I disconnected the display panel from the logic board.

da

Aggiungi un commento

Aggiungi la tua risposta

Jack Granato sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 24

Tutti i Tempi: 599