Rep: 1
1
I replaced LCD and broken glass, in the process I might damaged connector 3 and maybe other parts of the board.
When I close the IPhone, the screen display ok, the battery is charging, but the touch screen is working only on the left half side - I cannot scroll right to the end to unlock the phone.
What can be wrong? Should I need to replace the whole board?
Questa è una buona domanda?
Rep: 781,5k
1,1k
893
2,3k
Always double check your connection and make sure they are seated right and that you did not end up bending a pin or similar. Of course also make sure you have the right part and did not get the 3G part. If any and all of this works out okay, I would think that it is your digitizer. Usually, if it is something on the logic board, you have an overall non-functioning digitizer. If part of the digitizer is not responding, it is the digitizer that needs to be replaced. Hope this helps, good luck.
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 0
Tutti i Tempi: 912
