Salta al contenuto principale

Lanciato il 25 settembre 2015. Modello A1688/A1633. Si ripara in modo simile alle generazioni precedenti, richiede cacciaviti e strumenti di apertura. Versioni GSM o CDMA /16, 32, 64, 128 GB / Oro rosa, Oro, Argento, Grigio siderale.

2682 Domande Visualizza tutte

Why are the flex cables shorting out?

I am currently in the progress of repairing a iPhone 6s, I swapped out the lodgic board, battery, home button, and screen. Plugging in the flex cable for the front camera is either draining the battery really fast or makes a quick cloud of smoke. Anyone know why it would be doing this?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Soluzione Prescelta

Cloud of smoke? Definitely no good. Sounds like here are a lot of variables here since you swapped out a lot of components (honestly, that’s nigh on a whole new phone at this point) but here’s what I would check.

  1. Is this the same front camera assembly from the original display that you transplanted? Does the front camera even work despite the other issues? What about the ambient light sensor/proximity sensor? If no, make sure nothing was damaged in the process. Check the cable closely and the cable connector for signs of tearing or damage. If the camera came as a part of the display assembly, my money is on that part is bad. See if you can transplant the one from the original display.
  2. Do you know the new logic board is good? I would check the connector on the board and components around it. See if anything is getting hotter than it should.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

Isaac Nakagawa sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 35