Aggiusta la tua roba Comunità Store

Opzioni

Why does my laptop not charge the new cells we put in?

my battery wasn’t the best so me and my friend decided to put in new cells into the battery. when we put it in my laptop to charge the new cells it didn’t want to charge them. we know the cells aren’t dead, because when we put a wire in between both ends electricity came in between the wire and the cells. so the cells aren’t dead and my battery does get recognized by my laptop, so why does my laptop refuse to charge the new cells?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 1
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

The board that manages the cells (BMS) gets very unhappy when it notices that there aren’t cells connected anymore (like when you disconnected the old cells). This usually results in the board being permanently disabled. Sometimes depending on the battery, you can reset it, but you’d have to look it up.

For future reference, you can attach the new cells in parallel and then detach the old ones. The BMS usually will be fine then.

Questa risposta è stata utile?

Sì No
Punteggio 1

3 Commenti:

alright thanks for your comment, i'll try it when i get home and i'll give an update when i've done it

da

i tried everything i found on the internet but i couldn't manage to reset the bms. what do i do now?

da

@piot013 You'd have to get a used or fake battery replacement and be very careful with it. Laptop BMS circuits are really touchy and there's basically no way around it. I've been in that same boat before :(

da

Aggiungi un commento

Aggiungi la tua risposta

piotrek chrzan sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 25