Salta al contenuto principale

13" aluminum unibody, 2.0 or 2.4 GHz Core 2 Duo processor.

560 Domande Visualizza tutte

Black screen while start, external monitor does not work.

Hay

I have a MacBook (13-inch, aluminum, late 2008).

If i turn it on, i hear the start sound but the screen stays black.
An external monitor also does not work.
I tried to reset the NVRAM/PRAM and its still not working

Any Ideas?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

2 Risposte

Do you see a slight glow of the display in a darkened room? If you do your logic board needs repairs or replacement.

Questa risposta è stata utile?

Punteggio 0

Commenti:

I will check this

da

The display stays black, there is no slight glow.

da

Time to visit an independent mac repair shop!

da

Aggiungi un commento

I had this problem a while ago with a clients computer. After trying the usual troubleshooting by resetting PRAM etc. I took off the back to discover that there was massive corrosion on the powerboard and that the moisture indicator had turned red. After cleaning the electronics with Isopropanol, which will dry out moisture and also remove most corrosion, and removing the battery the computer started but ran very slowly. After also replacing the battery with a new one the system returned to normal

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Philipp sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 38