Aggiusta la tua roba Comunità Store

Repair guides and support for the 3rd generation of Chevy G-Series vans. Similar vans were produced under the GMC brand. Both used suspension and steering parts from GM's C-series pickup trucks.

15 Domande Visualizza tutte

Opzioni

What can cause our ignition switch to not turn over with key in it

Hi fellas, we recently bought a 1988 Chevrolet G20 camper Van and we were having to wiggle the key to get the ignition to turn over but once we get it to turn it cranks just fine. Today, after trying for hours, we can’t get it to turn over, we tried turning the wheel, we tried getting a new key thinking the key was worn out but it still won’t turn over now. Any ideas on what it could be?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

You need a new lock cylinder. I don't know all the specifics about your vehicle (like engine size etc) but I did a search based off what info was provided. You're looking at $20 or less at an auto parts store. I've posted a pic so you can see what I'm talking about. The cylinder is worn down so the keys aren't aligning everything as they should. A new key won't help much because the wear is also on the pins themselves. Replace that and you should be right as rain.

Block Image

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Maura sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 122