Salta al contenuto principale

Una console di gioco per la televisione prodotta da Sony Computer Entertainment, conosciuta anche come PS4. Annunciata il 20 febbraio 2013 e lanciata sul mercato il 15 novembre 2013.

1695 Domande Visualizza tutte

Ps4 was loud so I opened and cleaned it. Now it overheats.

I was living in a place that had roaches a couple of years ago. I just opened my ps4 because it was over heating (2 years ago I opened it to clean it and cleaned it and it was good) I decided to do the same thing again and found a lot of roaches inside. Somehow this thing is still working. After cleaning the dust and everything else that was inside of it some of the small grey pads inside are completly

worn. I re assembled the ps4 and now it sounds 3x worse than it did before after cleaning it and can’t run a game without overheating and having a red light. I don’t know what the grey pads do I’m assuming something to do with cooling. No clue what to do.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0

1 Commento:

Also it isn’t actually hot. The system is cold for some reason it thinks it’s overheating and is just going in with the fan. It’s literally ice cold.

da

Aggiungi un commento

1 Risposta

The grey pads you are referring to are thermal pads. They are placed on the RAM chips on the board to help transfer heat off them to the heatsink above.

Did you separate the CPU heatsink from the board? If you did, did you replace the thermal paste on the CPU itself?

When cleaning a console, I always recommend removing the CPU heatsink and replacing thermals, this also allows you to clean both sides of the fan much better and blow through the heatsink and completely clear it out :)

Hope this helps you somewhat :)

Sostituzione Pasta Termica PlayStation 4

Questa risposta è stata utile?

Punteggio 0

2 Commenti:

Is there anyway I can replace the thermal pads? They were literally non existent. And for the thermal paste I didn’t have any. I’m gonna go out and get some.

da

You will need to buy some normal GPU Thermal Pad Strips, then cut them to size. When reassembling the CPU cooler should be seated firmly on the board with no movement.

da

Aggiungi un commento

Aggiungi la tua risposta

Phasy sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 301