Salta al contenuto principale

How can I avoid stripping my Joy-Con's screws?

It should be explanatory, but I'll try explaining.

A week or so ago, the rail on my left Joy-Con fell out, and I got a repair kit

A week later to today, I can't even get the screws on the back of the case off without feeling like I'm stripping them. I'm new here, so are there any tips as to how to unscrew things without stripping them?

Block Image

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

2 Risposte

iFixit has this guide: Migliori pratiche con il cacciavite

Although, it might be your screwdriver, tri wing screws (which are on the joy con) are pretty picky and cheap screwdrivers (eg. amazon or stuff you get with parts) don’t work. You might have some luck with iFixit’s screwdrivers, they worked very well for me.

Questa risposta è stata utile?

Punteggio 0

Commenti:

Hmmm... See, here's the thing. It is a third party TTX kit. But I didn't get it off Amazon, I bought this from my local Micro Center (computer store), and my dad was able to unscrew the tri wing screws with the same screwdriver. We got the rail back in, but now it doesn't make the iconic "click" sound when put into a Switch or a Joy Con Grip. It also falls off WAY easier and the Release button just doesn't do anything good.

da

Aggiungi un commento

I was having that problem when I put my case back together. I opened it back up and figured out that the rail wasn't seated properly. I fixed that and now the screws fit great!

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Hamm Khan sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 39

Tutti i Tempi: 446