Aggiusta la tua roba Comunità Store

Modello A1989, EMC 3358. Aggiornamento del modello esistente, con nuove opzioni per il processore e un cambiamento nei materiali della tastiera. Disponibile nei colori Argento e Grigio siderale. Rilasciato nel maggio 2019.

134 Domande Visualizza tutte

Opzioni

MacBook screen blue (no apple logo) after replacing bezel front trim

So I had replaced the bottom strap on screen (where name of MacBook is) and now my MacBook switches on to dark blue screen. No logo, no chime, no nothing on screen, caps lock works. What could be wrong. Did I over heat anything? Nothing seems to be broken nor ripped from "ribbons" at the bottom of screen, I just can't get it to load regular screen. During process of heating the aeria I saw laptop booted and screen was while with login, flickering and came back to colored and normal so I switched it off and finished and now nothing.

I tried reseting Command+Option+P+R keys together nothing.

Any help and hints much appreciate it.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

Ouch! Sounds like you were a bit aggressive with the heat gun and/or damaged the cables. The T-CON board is very close to the hinge area as you can see here.

Block Image

Sadly, its time to replace the full display assembly Sostituzione gruppo display del MacBook Pro 13" Touch Bar versione fine 2016

Questa risposta è stata utile?

Sì No
Punteggio 0

4 Commenti:

Any other solutions to try before taking it apart? Seem I have 2019 pro with touchbar .Any other ideas even if low percentage of success rate?

da

@absolutelyfabfad - OK so you elected the wrong system, I'll fix that. Sorry no magic ;-{ You need to replace the display.

Here's the proper part for your system 13" MacBook Pro Complete Display - Space Grey and the guide for it Sostituzione schermo MacBook Pro 13" Touch Bar 2019

da

Do you guys think apple would be able to replace just the T-CON Board or also will they go for whole LCD?

da

@absolutelyfabfad - Apple will only replace the full assembly, which includes the T-CON board as that is hardwired to the LCD panel.

da

Aggiungi un commento

Aggiungi la tua risposta

absolutelyfabfad sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 6

Tutti i Tempi: 163