Salta al contenuto principale

Modelli A1419 / Fine 2012 / Processori 2.9 & 3.2 GHz Core i5 o 3.4 GHz Core i7, ID iMac13,2

328 Domande Visualizza tutte

late 2012 iMac speakers wiring pinout

Hi,

I am preparing to turn my late imac 2012 27” display into a secondary screen with a driver board.* It has also a speaker connector that accepts a 4P PH2.0 connector, but I do not know how to wire the odd speaker connector to the 4P PH2.0 connector. Could a helpful person assist with a pinout for this?

*for reference: (assumption since I won’t actually open this mac until New one arrives, as I’d be left without a machine otherwise) I plan on using HDMI+DVI+DP LCD Controller Board edp Monitor Kit for imac 27" LM270WQ1(SD)(F1) board unless I will find another part code once i unmount screen

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Soluzione Prescelta

Here’s the schematic of the logic board side

Block Image

Questa risposta è stata utile?

Punteggio 1

2 Commenti:

thank You for the information, would You be able to advise how to modify speaker side plug / crimp a new plug to fit a 4P PH2.0 connection format ?

da

The cable harness side is crimp on, you'll need a special tool to do it correctly without damaging the connector. The logic board connector requires solder pads.

Beyond that I can't offer any answer, sorry.

da

Aggiungi un commento

Aggiungi la tua risposta

Marcin Kowalczyk sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 7

Tutti i Tempi: 283