Aggiusta la tua roba Comunità Store

Console per videogiochi prodotta da Sony Computer Entertainment; la PlayStation 4 Slim (serie CUH-2000) è un modello sostitutivo più sottile della PS4 originale. Annunciata il 7 settembre 2016.

566 Domande Visualizza tutte

Opzioni

Why I am getting every time that error: SU-41350-3

Hello, previously it had the other error code (SU-42118-6) when I bought it from seller, when I get the item and plugged in it throwing that message: Can not find the update file (SU-41350-3). I tried different usb drives 8 and 16gb size. downloaded reinstallation file and tried to reinstall, but after pressing ok (x button) it shows that error. is there any good solution? HDD has 100% health

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 1
3 Commenti

I replaced HDD , both hdd has 100% of health. but still getting the same error

da

I Think Tronicsfix should be good at this point. He would have experience

da

Create a usb with exfat or fat32 partition. Create a folder structure PS4\UPDATE and place your PSUPDATE.pup inside it. Then Ps4 will recognize it.

da

Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Soluzione Prescelta

Opzioni

Hi!

How is the USB formatted? Should be FAT32.

Also make sure you use the “Reinstallation file” and not the “update file”.

You should need this one: http://dus01.ps4.update.playstation.net/...

Guide: https://www.playstation.com/en-us/suppor...

Note: If nothing is working, just swap it with a known working hard drive. If that also fails, my guess is that something went wrong in the firmware…

Questa risposta è stata utile?

Sì No
Punteggio 2

5 Commenti:

I did the same way several times, reinstallation file written on the fat 32 formatted usb drive. correct folder name. I replaced hdd with another one, but same problem . maybe the previous error code is in action?

da

If that is the case, please read the following article: https://windowsreport.com/ps4-errors-su-....

They are telling "This error comes from a broken ribbon connector between your motherboard and BD-ROM". Perhaps replacing the ribbon cable can work, or the drive needs to be replaced. Worst case: Something is wrong with the drive's PCB or motherboard related.

da

I have working one and will try . thanks

da

No good news. I replaced the BR drive. also checked all ribbon cables connection between two side, they all beeped with multitester

da

Perhaps it is firmware or motherboard related.. Motherboard looks good too?

da

Aggiungi un commento

Aggiungi la tua risposta

Giorgi Mamardashvili sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 50

Tutti i Tempi: 1,707