X100 F bottom plate replacement

Question

Fujifilm X100T

The Fujifilm X100T is the third-generation camera of the X100 series released in late 2014 by Fujifilm Corporation. It comes in two colors: black and silver, and can be identified with a capital T on the front. It is Wi-Fi capable and can take 16 megapixel photos.

5 Domande Visualizza tutte

Neven Miškulin @nevenmiskulin

Rep: 13

1

Postato: 25 dic 2020

Opzioni

X100 F bottom plate replacement

Hi!

I have to replace the bottom plate od my x100F. I have watched X100T dissesembly guide on this site. It is not clear do I have to peel the leatherette or do I just remove the six screws at the bottom of the camera with the leatherette on. Did anyone took appart the x100F?

Thank you

Neven

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 1

Aggiungi un commento

3 Risposte

Chris @chris_almo Rep: 13 1 · Answer 1 · 2021-04-21T14:49:37-07:00

Risposta Più Utile

Chris @chris_almo

Rep: 13

1

Postato: 21 apr 2021

Opzioni

I took both cameras apart and removing the bottom plate of the X100F is way easier than with the X100T. You just need to remove 5 screws in the bottom. One at the battery compartment and the four remaining ones on the opposite side – leave the two at the tripod mount where they are for now. You can then remove the bottom plate. If you need you can unscrew the tripod mount to move it to the new bottom plate.

Since your post has been here for a while this might not be of interest to you anymore, but maybe it is helpful for somebody else in the future ;)

Cheers

Chris

Questa risposta è stata utile?

Sì No

Punteggio 1

Aggiungi un commento

Neven Miškulin @nevenmiskulin Rep: 13 1 · Answer 2 · 2021-04-22T01:36:48-07:00

Neven Miškulin @nevenmiskulin

Rep: 13

1

Postato: 22 apr 2021

Opzioni

Hello Chris, thanks for you answer. I did found someone who made the replacement but still I am sure that one more screw must be removed, the one on the side of the camera (the one with the focus selection lever. Please verify it, so people do not wonder about it, if they have to do it.

Cheers

Neven

Questa risposta è stata utile?

Sì No

Punteggio 0

2 Commenti:

My apologies, I suppose you are right, Neven. I will remove the bottom plate in the evening to verify. Maybe I take some pictures and post them here.

22 apr 2021 da Chris

Hi Chris,

Have you had a chance to verify it?

Thanks,

M.