Salta al contenuto principale

The April 2014 update of the 11" MacBook Air packs refreshed dual-core i5 and i7 Haswell processors and slightly increased battery performance.

96 Domande Visualizza tutte

Won´t sleep when close lid, faulty hall effect sensor?

The MacBook running newest MacOS Catalina won´t sleep when i close the screen/lid.

Tried reseting SMC and PRAM, also tried running a magnet along all edges with no effect. Running on original Apple SSD.

Wondering where the hall effect sensor is located on this model? Is it part of the I/O board as I’m suspecting this is faulty and needs replacing?

Could re-installing MacOS Catalina help? If I manually enter sleep and close the lid it´ll sometimes react once closed and wake up, this is the only scenario in which I seemingly am able to get a reaction from the lid sensor.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Risposta Più Utile

Apple loves moving things about! This series Hall sensor is located on the main logic board on the back side as you can see here:

Block Image

Pop the logic board out and inspect it for corrosion MacBook Air 11" Early 2014 Logic Board Replacement if you see anything take a nice sharp picture and post it here for us to see Aggiungere immagini ad una domanda

Immagine iFixit

Guida

Aggiungere immagini ad una domanda

Difficoltà:

Molto facile

2 - 5 minutes

Immagine MacBook Air 11" Early 2014 Logic Board

Guida

MacBook Air 11" Early 2014 Logic Board Replacement

Difficoltà:

Difficile

30 minutes - 1 hour

Questa risposta è stata utile?

Punteggio 1

Commenti:

Thanks for the picture. I’ve found the problem and it’s the transistor(?) that seems to have snapped/fallen off at some point. Can the individual transistor can be bought from somewhere? If not guess i´ll have to find a donor from a model that has the hall sensor on it’s IO board as I´m guessing it’s the same transistor type on different year models.

da

@wackster - Apple hasn't altered the design over the years so I do think you can salvage the Hall sensor from another board.

da

Aggiungi un commento

Aggiungi la tua risposta

Marik sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 6

Tutti i Tempi: 65