Salta al contenuto principale

Annke CCTV has died

My Annke CCTV was working fine till I stupidly plugged a USB mini fan into it. The fan ran for about 10 minutes then stopped and now I have no power at all to the cctv.

I’ve taken board out and where the power goes in there is a large black square component. Can anyone tell me if its a fuse. The supply is 48volts. There is no continuity across this component.

Block Image

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Risposta Più Utile

Hi @boness

TVS - This is a TBS - Transient-voltage-suppression diode

I see it is powered by an external power adaper.

Do you have a multimeter?

Measure and check on if the power adapter is giving the out correct voltages.

Questa risposta è stata utile?

Punteggio 2

2 Commenti:

Hi, thanks for your reply. I have checked the psu and it is working

da

take more pics , showing up the whole mainboard.

try removing the mainboard and check if there are any burnt components

da

Aggiungi un commento

Aggiungi la tua risposta

Gordon sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 3

Tutti i Tempi: 153