Why R2 works on its own?

Hello

I have this problem for a while and couldn't fix it with some solutions I found in communities and YouTube.

My problem is that R2, triggers by itself (like you hold it and don't release it). Sometimes (I mean rarely) R2 is fine but when I press L3, R2 starts triggering continuously. I opened my controller and I'm sure that R2 button, R2 spring and R2 silicone pad are fine. I took out every button and connected the ribbon circuit board film to the board and the problem still existed. I tried with another ribbon circuit board film and got the same result. One thing I have to mention is that my ribbon circuit board film model is JDM-040 but the other model that I tested was JDS-055. I know it is not compatible with my controller and some buttons like square didn’t work at all but even with JDS-055 ribbon circuit board film, R2 didn’t stop triggering. Anyone knows what could be the issue?

Thank you in advance.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento