Salta al contenuto principale

Model A1419 / Late 2013 / 3.2 & 3.4 GHz Core i5 or 3.5 GHz Core i7 Processor, ID iMac14,2

339 Domande Visualizza tutte

Dead iMac, how to do?

I replaced the thermal paste of my iMac as it has been getting very hot lately. Once mounted, the computer no longer turns on: no sound, no fan ... dead. Diagnostic LED # 1 is on, all others are off. I replaced the power supply but nothing has changed. I tried to remove the Ram, the button battery, reset SMC but nothing, it doesn't want to turn on. Logic board dead, CPU dead? How can I understand what's wrong?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Risposta Più Utile

You’ll need to go back to your CPU. I’m suspecting its not properly mounted and/or the pins in the socket are damaged.

Make sure you have the chip correctly placed and when you tighten the screws you follow the proper technique to tighten them. Think how you mount a spare tire going back and forth across the lug nuts so you mount the rim evenly. We need to follow this same approach! once the screws are snug you need to torque them evenly as well and to the correct value.

Questa risposta è stata utile?

Punteggio 1

4 Commenti:

If the problem was only the CPU, shouldn't the fans, HDD still start or make some kind of noise?

da

Not if the chip is shorting out.

da

I'll try thanks!

da

It was the CPU. But now the computer emits 3 beeps, I replaced the Ram but nothing. I state that to mount the heatsink I disassembled the Ram cart which bothered me. I put it back in its place, checked it again, it seems to me in place but the computer is not working.

da

Aggiungi un commento

Aggiungi la tua risposta

Luigi Sammartino sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 47