Rep: 1
1
I bought this from a govt auction. They pulled the hard drive out, but in that process they broke the display adapter on the logic board. Can I replace this board with a board from Late 2009?
Questa è una buona domanda?
Rep: 685,2k
3,4k
1,1k
2,6k
I’d see if I could disconnect the connector body which was pulled off with the cable from display cable, then connect it to the logic board and secure it with Kapton tape then connect the cable back to the display.
Questa risposta è stata utile?
@mayer - Yes, threading the plastic shell back is a possible solution!
So, the logic board connection would be the new "permanent" connection?
prabs That's the idea. Straighten those pins up some before doing it first.
Thanks. I will give it a shot or try what Dan suggested.
Rep: 478,9k
35
329
970
Here’s a vid showing the steps to re-tin the pads after desoldering the pins from them iMac 21,5" & 27" LVDS Display connector repair and here is the connector LCD Display LVDS Cable Connector (30-pin)
You may want to find someone with the needed tools and skills to put a new connector on. This would be the best solution if you can’t get the pins re-inserted into the shell.
Questa risposta è stata utile?
Thanks. I will ask if my buddy can give it a shot or try what mayer suggested.
Rep: 37,6k
315
66
72
The best solution would be to solder a new socket on the board. Try to fit the broken one is risky cause you could short pins and damage the display and (or) the logic board. There's 50v passing thru the socket to the display cable.
Questa risposta è stata utile?
Long time, no see
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 2
Tutti i Tempi: 106
5 Commenti
Please post a few pics of the damage Aggiungere immagini ad una domanda so we can see what you need.
da Dan
Hi Dan, I just uploaded a couple of pictures.
da prabs77
Yup it is possible
if you find my answer useful please click accept as a solution.
da Reece Clegg
@imacman123 - So how you you fix this?
Saying its possible is not an answer!
da Dan
I meant it is possible to use a 2009 replacement logic board on an iMac 2009 sorry for misunderstanding.
da Reece Clegg