Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

L'aggiornamento di Marzo 2015 della linea 13" dei Macbook Pro con Retina Display (modello A1502) adotta processori Intel Core i5 ed i7 di quinta generazione, introduce inoltre il trackpad Force Touch.

967 Domande Visualizza tutte

I was replacing the battery... but I knocked off 1 of 2 silver circles


Block Image

I was replacing the battery, following the ifixit guide...

I was Upto step 9 and

but I knocked off 1 of 2 silver metal circles just above battery connector in the middle.

what do these 2 metal circles do?

should I super glue it back on?

or does this metal component need more attention (like a soldering iron)?

what do I need to do?

Update (05/25/2020)


Block Image

Block Image

Block Image

Thank you for your replies.

so based on the image and information provided…

can I glue this back to the board?

or does this need soldering?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0

Commenti:

Let's see what you got post an image of what you knocked off and the place they came from Aggiungere immagini ad una domanda

Did you follow this guide: Sostituzione batteria nel MacBook Pro 13" Retina Display versione inizio 2015?

da

@o07bond - OK, you broken off the mounting studs. Let's get a pic of yours so we have a better idea how they came off. Focus on the mate surfaces of the studs and the logic board location.

da

Aggiungi un commento

2 Risposte

Soluzione Prescelta

It looks like basically a nut that you can put a screw into it.

Update (05/25/2020)

It will need to be soldered down to secure it.

Questa risposta è stata utile?

Punteggio 1

Commenti:

It's a logic board standoff (stud). It offers a threaded mount point to anchor something, in this case a metal cover.

da

@danj

Thanks the replies Dan - it definitely has threads inside of it :)

I think the metal shield goes over it

In terms of getting it to stick back down...?

Thoughts

da

It will need to be soldered down to secure it.

da

Aggiungi un commento

You will need to get some acetone to clean off the surfaces and then carefully screw in the screw back into the plate and the stud so the plate sits correctly. then carefully screw in the other screw which holds the plate to the second stud. Now ever so carefully lift the edge of the plate just enough (hairline) so you can drip a drop of Cyanoacrylate glue (a.k.a Krazy Glue)

There is no solder used here.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

Josh sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 57