5 
1 A few clonks/bangs when starting a spin
We have a Bosch classixx 1400 express.
It runs perfectly fine until it starts the spin cycle.
At a certain (low) RPM it will clonk/bang loudly about 5 or 6 times. Then once it gets too about half speed it stops making the noise.
It does the same when slowing down but not as noisily.
It's done this for about 6 months and hasn't got any worse.
Any ideas what the problem could be?
Questa è una buona domanda?
Punteggio
0
2,6k 