Salta al contenuto principale

Modello A1311 / Metà 2010 / Processore Core i3 da 3,06 e 3,2 GHz o Core i5 da 3,6 GHz

342 Domande Visualizza tutte

Not turning on after reassemble

Hello, my iMac isn’t turning on after I reassembled it.

The testing LEDs work weird:

When I connect power cable to iMac LED 1 is blinking 1 time and then turning on.

When I press the power button, LED 1 is turning off.

No other LEDs are turning on.

The PSU unit is making some humming noises when is connected to power

What could be a reason for such a behaviour?

Thanks a lot for answering!

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0

4 Commenti:

What did you do that required opening the system?

da

@danj I changed thermal paste on CPU and GPU + replaced HDD and DVD ROM with 2 SSDs

da

Did you use proper ESD protection?

da

@danj unfortunately no, I don't have any

da

Aggiungi un commento

1 Risposta

Your power supply is not working correctly. As to why given what you’ve added I would suspect you have either a damaged cables or a bad SSD.

Best to backwind your changes, disconnect from the logic boar the cable connections are you belt o get the onboard diagnostics to get to the graphics test (without the display mounted).

Questa risposta è stata utile?

Punteggio 0

2 Commenti:

I tried to disconnect everything form motherboard except psu, GPU, CPU and one unit of RAM, nothing changed.

So I assume I have to buy new PSU, right?

da

At this point that's what I would do. But, I use ESD precautions. Here your logic board could be damaged as well.

You'll need to start with this and then hope for the best.

Used - iMac 21.5" Power Supply 205W, Apple P/N 661-5299

da

Aggiungi un commento

Aggiungi la tua risposta

strimban sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 57