Aggiusta la tua roba Comunità Store

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1500 Domande Visualizza tutte

Opzioni

Can I disconnect front assembly while the phone is turned on?

Hi there,

I have recently replaced the back housing and front panel assembly for my 3Gs iphone. The USB device is not recognized in windows, and the phone hangs on the boot screen, with an eternal spinning load sign.

I cant do a hard reset, I figure this is because one of the button's is not connected properly.

Can I remove the 3 connectors and remove the screen while the phone is on, or do I have to wait til it goes flat?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

You can just remove the 3 connectors, it doesn't cause any harm.

Also, have you checked to see if the dock connector is plugged in properly?

No I haven't.

Ok, try checking that.

Alright I'm trying now...

Hey it worked.

You are a legend.

I know.

Questa risposta è stata utile?

Sì No
Punteggio 1

2 Commenti:

thing is you're not always this lucky, you can damage the backlight or LCD in this way (I've done it..lesson learned) so although it isn't the best practice to leave a phone on to disconnect the display, it can be done. The best option is to slide to power off (hold power button until prompt appears) or allow to go flat before attempting repairs.

da

Exactly what Polly said, you were lucky. A lot of people damage their display/phone doing it this way. WSOD is another issue you'd see.

da

Aggiungi un commento

Aggiungi la tua risposta

Tim sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 461