MacBook Pro wouldn&#039;t accept RAM upgrade.

Opzioni

MacBook Pro wouldn't accept RAM upgrade.

Last month I tried to upgrade my Mom’s 2012 MacBook Pro with this RAM - Crucial 8GB Kit (4GBx2) DDR3/DDR3L 1600 MT/s (PC3-12800) SODIMM 204-Pin - CT2K4G3S160BM. It would run for a bit but then crash and never figured out why. The attached picture is the specs for her Mac. I’ve searched all over google for an answer and can’t figure out why it failed.

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

3 Risposte

Soluzione Prescelta

mayer @mayer

Rep: 685,3k

MacHale Enterprises

3,4k

1,1k

2,6k

https://everymac.com/systems/apple/macbo...

Opzioni

Replace the old RAM first and get the machine running. Next replace just one stick of the new RAM and see if it works. Now try the new stick in the other slot. This checks both the RAM and the slot. Repeat with the second stick.

Are you getting any beep tones?

UPDATE

RAM Type:PC3-12800 DDR3LMin. RAM Speed:1600 MHz

Details:Supports 1600 MHz PC3-12800 DDR3L SDRAM SO-DIMMs (204-pin).

Standard RAM:4 GBMaximum RAM:16 GB*

Questa risposta è stata utile?

Sì No

Punteggio 2

5 Commenti:

I have done what you've said with swapping the sticks before with no luck. It did make a beep tone once it crashed the Mac and I tried to reboot it, which it wouldn't allow it to reboot.

Did it work with the old RAM in place?

30 dic 2019 da mayer

@mayer it would crash regardless of the combination. So any combo of either old or new caused it to crash too. It does not crash with both old sticks installed though

At this point my best guess would be that the new RAM is faulty or has received ESD damage. Meanwhile, try pulling the old and booting with just one stick of the new RAM. Try it in both slots. Now do the other stick and see if you can identify if both are faulty.

30 dic 2019 da mayer

@mayer Alright, I'll have to try that. Thanks for your help, appreciate it.

Bruno Debattista @brunodebattista

I have done what you've said with swapping the sticks before with no luck. It did make a beep tone once it crashed the Mac and I tried to reboot it, which it wouldn't allow it to reboot. — Jarad Turner
@mayer it would crash regardless of the combination. So any combo of either old or new caused it to crash too. It does not crash with both old sticks installed though — Jarad Turner
At this point my best guess would be that the new RAM is faulty or has received ESD damage. Meanwhile, try pulling the old and booting with just one stick of the new RAM. Try it in both slots. Now do the other stick and see if you can identify if both are faulty. — mayer
@mayer Alright, I'll have to try that. Thanks for your help, appreciate it. — Jarad Turner

Bruno Debattista @brunodebattista Rep: 79 4 · Answer 1 · 2019-12-30T10:11:00-07:00

Rep: 79

4

Opzioni

That RAM should work fine. There must be something wrong with it.

Questa risposta è stata utile?

Sì No

Punteggio 0

1 Commento:

I'm starting to think the same thing

Truckguy @thatonetruckguy

Truckguy @thatonetruckguy Rep: 750 11 11 1 · Answer 2 · 2019-12-30T10:50:31-07:00

Rep: 750

11

1

Opzioni

Try reseating the ram. This means taking it out and putting it back in. I would also take an air duster to the slots to remove any dust. If it still crashes, then your ram sticks may be faulty. If they are still under warranty, you can return the faulty ram and you should get a replacement.

Questa risposta è stata utile?

Sì No

Punteggio 0

1 Commento:

I have already done what you've suggested. You might be right about the stick(s)being faulty. Thanks for your input